序號 |
學生姓名 |
專業年級 |
指導教師 |
論文題目 |
刊物名稱 |
發表時間 |
1 |
孟雪 |
紡材18 |
樊威 |
Recycling of denim fabric wastes into high-performance composites using the needle-punching nonwoven fabrication route |
Textile Research Journal |
2020 |
2 |
袁林佳 |
紡材17 |
樊威 |
Enhanced Mechanical and Electromagnetic Properties of Polymer Composite with 2.5D Novel Carbon/Quartz Fiber Core-Spun Yarn Woven Fabric |
Journal of Industrial Textiles |
2020 |
3 |
薛利利 |
紡材17 |
樊威 |
The influence of thermo-oxidative aging on the electromagnetic absorbing properties of 3D quasi-isotropic braided carbon/glass bismaleimide composite |
Polymer Degradation and Stability |
2019 |
4 |
李娟子 |
紡工17 |
樊威 |
Influence of Reinforcement Structures and Hybrid Types on Inter-Laminar Shear Performance of Carbon-Glass Hybrid Fibers/Bismaleimide Composites Under Long-Term Thermo-Oxidative Aging |
Polymers |
2019 |
5 |
黨文生 |
紡材17 |
樊威 |
Fatigue behavior of the 3D orthogonal carbon/glass fibers hybrid composite under three-point bending load |
Materials & Design |
2019 |
6 |
董經經 |
紡工17 |
樊威 |
Fast and accurate bending modulus prediction of 3D woven composites via experimental modal analysis |
Polymer Testing |
2019 |
7 |
薛利利 |
紡材17 |
樊威 |
Enhancement of mechanical and electromagnetic absorbing properties of carbon/glass hybrid composites with a three-dimensional quasi-isotropic braided structure |
Textile Research Journal |
2019 |
8 |
王關林 |
紡工18 |
余靈婕 |
3D web reconstruction of a fibrous filter using sequential multi-focus images |
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES |
2019 |
9 |
李博宇 |
紡材17 |
劉呈坤 |
Controllable Aligned Nanofiber Hybrid Yarns with Enhanced Bioproperties for Tissue Engineering |
Macromolecular Materials and Engineering |
2019 |
10 |
楊梅 |
紡材17 |
孫潤軍 |
Preparation, characterization and kinetics study of chitosan/PVA electrospun nanofiber membranes for the adsorption of dye from water |
Journal of Polymer Engineering |
2019 |
11 |
涂莉 |
紡工17 |
孟家光 |
廢舊毛_絲_棉混紡面料的組分分析及其剝色工藝 |
紡織學報 |
2019 |
12 |
張琳 |
紡工17 |
武海良 |
堿處理對異形截面聚酯紗線芯吸效應及強力的影響 |
紡織學報 |
2019 |
13 |
韓燁 |
紡工17 |
張輝 |
聚乙二醇對硫酸鈦水熱改性滌綸纖維光催化性能的影響 |
紡織學報 |
2019 |
14 |
楊靜 |
紡工17 |
劉艷君 |
聚乙二醇對硫酸鈦水熱改性滌綸纖維光催化性能的影響 |
紡織學報 |
2019 |
15 |
吳夢婷 |
染整18 |
徐成書 |
線性聚醚嵌段氨基硅油的制備及其性能 |
紡織學報 |
2019 |
16 |
譚耀紅 |
紡材16 |
劉呈坤 |
壓電式納米發電機及其混合器件的研究進展 |
材料工程 |
2019 |
17 |
袁林佳 |
紡材17 |
樊威 |
Enhanced mechanical and radar absorbing properties of carbon/glass ?ber hybrid composites with unique 3D orthogonal structure |
Polymer Testing |
2018 |
18 |
田薈霞 |
紡材18 |
樊威 |
Enhanced interfacial adhesion of aramid fiber III reinforced epoxy composites via low temperature plasma treatment |
Polymer Testing |
2018 |
19 |
秦彩霞 |
紡工16 |
李龍 |
Comparison of the Structure and Properties of Wool and Cashmere Fibers under Potassium Permanganate Treatment |
FIBRES & TEXTILES in Eastern Europe |
2018 |
20 |
李 鑫 |
紡材16 |
張輝 |
Fabrication of magnetized polyester fabric grafted with -cyclodextrin for controlled release of menthol |
Journal of Industrial Textiles |
2018 |
21 |
薛海軍 |
紡材16 |
張輝 |
The disappearance of photocatalytic propertiesof titanium dioxide nanoparticles formed on PET fabrics treated in a simultaneous hydrothermaldyeing process |
The Journal of The Textile Institute |
2018 |
22 |
譚耀紅 |
紡工16 |
劉呈坤 |
靜電紡制備定向納米纖維集合體的研究現狀 |
高分子材料科學與工程 |
2018 |
23 |
熊 銳 |
紡工14 |
武海良 |
中低溫水溶季銨陽離子淀粉漿料的合成及其漿紗性能 |
紡織學報 |
2017 |
24 |
秦彩霞 |
紡工16 |
李龍 |
棉稈皮纖維素纖維的梳理與細化 |
紡織學報 |
2017 |
25 |
楊明杰 |
紡工14 |
沈艷琴 |
中低溫條件下聚乳酸長絲的上漿機制 |
紡織學報 |
2017 |